![[IGWMC Main Menu]](/pics/panel2.gif)
international ground water modeling center
Listed below are DEMOS of some of the software IGWMC has to offer, as well as some free, public domain software (indicated as PROGRAM). Detailed description of most programs can be found on this web site under the IGWMC Software listing. For others check our "software news" section. All the programs are set up as self-extracting files, which can be activated by typing the name of the file at the DOS prompt, or at the 'RUN' command from the Windows file menu, followed by the parameter -d (to include archived subdirectories). For example, to extract the files for the Hydrus-2D demo, type at the DOS prompt: HYDRDEMO -d. The Hydrus-2D and VisualModflow demos need to be installed before you can run them, while the others are ready to be used. Follow the instructions in the README.TXT, READ.ME, or README.1ST files first (after extracting them!).
Because some of these demos consist of a rather large number of files, you are advised to create a separate directory first, and copy the demo to this directory, before extracting the files. For the Hydrus-2D demo, you will need to install the program to a directory separate from where the installation program and data files are located.
If you have software or software demos you want to post on this site, send us an email, and we will give you the necessary instructions.
AQTESOLV - a complete aquifer test analysis package that provides methods for determining aquifer properties from single- and multi-well test configurations for both pumping tests and slug tests
Argus ONE - easy-to-use graphical workplace. MODFLOW-GUI PIE installs its menus and dialogs into Argus ONE so that all tasks of setting MODFLOW control parameters such as the number of stress periods and geological units, running MODFLOW and visualizing MODFLOW output is performed from within Argus ONE.
BIOSCREEN - remediation through natural attenuation of dissolved hydrocarbons at petroleum fuel release sites (v1.4 - July 1997)
BIOCHLOR - remediation by natural attenuation (RNA) of dissolved solvents at chlorinated solvent release sites (v2.2 - June 2002)
BIOPLUME III - EPA version of popular 2D flow/transport/aerobic biodegradation model
CASE - dealing with salinization of coastal fresh water aquifers
CHEMFLO - screening model for flow and transport in soils (v1.30 - August 1989)
ENVIRONMETNALInsite - Environmental Insite is a desktop tool for analysis and communication of environmental groundwater data.
FLOWPATH II - 2-d groundwater flow, remediation, and wellhead protection model
JUPITER-API and Applications - Joint Universal Parameter IdenTification and Evaluation of Reliability - Application Programming Interface
GEOEAS - geostatistical environmental assessment software: Kriging Software
GEOPACK - user-friendly geostatistical software system: Kriging Software
HYDRUS-1D - a MS Windows Program for Simulating Water Flow, Heat and Solute Movement in One-Dimensional Variably Saturated Media with full-color, high-resolution Graphics User Interface
HYDRUS-2D/3D - A MS Windows Program for Simulating Water Flow and Solute Transport in Two and /Three-Dimensional Variably Saturated Media with full-color, high-resolution Graphics User Interface (Demo Version)
MISP - code for contaminant transport from a source located above the water table and subsequent 3-D transport in the aquifer
MMA - a computer code for mutil-model analysis, constructed using the JUPITER API
MODALL - A Practical Tool for Designing and Optimizing Capture Systems
MODFLOW-GUI PIE allows the user to graphicaly input all the GIS data, run MODFLOW, and visualize the results all from within
MODMAN optimization program designed to link with the USGS MODFLOW model
ModTech - 3D groundwater flow and mass transport modeling software
MPNE1D - general analytical solution for one-dimensional solute transport
MT3DMS - modular 3-D multi-species transport model for simulation of advection, dispersion, and chemical reactions of contaminants in groundwater systems
NAPL Simulator - conducts a simulation of the contamination of soils and aquifers which results from the release of organic liquids commonly referred to as Non-Aqueous Phase Liquids (NAPLS) (v1.0 - October 1997)
NETPATH - an interactive program for calculating NET geochemical reactions and radiocarbon dating along a flow PATH
PARFLOW is an integrated, parallel watershed model that makes use of high-performance computing to simulate surface and subsurface fluid flow. The goal of the ParFlow project is to enable detailed simulations for use in the assessment and management of groundwater and surface water, to investigate system physics and feedbacks and to understand interactions at a range of scales. To download, click here.
RITZ is a screening level model for simulation of unsaturated zone flow and transport of oily wastes during land treatment.
RPTSOLV - a Windows-based finite element model for pumping test analysis in fractured rock (demo)
SEAWAT - A Computer Program for Simulation of Three-Dimensional Variable-Density Ground-Water Flow and Transport
SIM_ADJUST - A Computer Code that Adjusts Simulated Equivalents for Observations
STANMOD - Computer Software for Evaluating Solute Transport in Porous Media Using Analytical Solutions of the Convection-Dispersion Equation
SURGE - a computer program which enables to generate a surface as an interpolation (approximation) function of two independent variables
SWI (Sea Water Intrusion) Package is intended for the modeling of regional seawater intrusion with MODFLOW.
SWMS-2D - a computer program for simulating water and solute movement in two-dimensional variably saturated media
TimML is a a free, open-source, multi-aquifer analytic element model.
TWODAN is a DOS-based multi-functional analytic element model for two dimensional steady-state flow
UCODE_2005 is a DOS/UNIX universal inverse modeling program
UNITS is a DOS-based groundwater units conversion (Shareware)
WIDE - responses of four major types of aquifers to well placement, rate of extraction, and well number
ZBSoft - a threedimensional flow and contaminant transport modeling based on the Zheng-Bennett text book on this topic
All files have been tested from remote sites. If you have a problem downloading (or your web browser does not support that) send us an email and we will send you the file attached to a return email.
If you have any questions or
problems, please email igwmc@mines.edu.
Last modified: June 18, 2009