Practical Tracer Testing Techniques for Site Characterization and Remedatiation System Design
June 6, 2013 (8AM - NOON)
Tracers have been broadly utilized in hydrogeologic and hydrologic studies for many years to understand solute transport phenomena in porous media and fractured rock aquifers. However, until recently, tracers were mostly used in research settings and only infrequently employed by consultants and practitioners at typical contaminated sites. This shift is in large part due to the recognition that the success of many in situ remedial strategies is tied to local scale hydrogeologic conditions, reagent distribution, and contaminant transport behavior. Consequently, tracers are increasingly becoming a standard and cost effective hydrogeologic characterization tool used by consultants to obtain basic aquifer characterization information and support development of conceptual site models, calibration of numerical flow and transport models, evaluation of contaminant-related risk, and remediation system design and assessment.
This workshop will focus on the practical use and application of tracers by practitioners at remediation sites. Specifically, the material will include guidance on the use of tracers to characterize aquifer injectability, understand reagent distribution and utilization, quantify contaminant transport and degradation, and provide a basis for the design and optimization of in-situ remediation systems. Additionally, the course will highlight examples of how tracers can be used to measure contaminant flux, assess LNAPL mobility, and evaluate hydraulic capture. The course will cover basic terminology and concepts, tracer materials and analytical methods, health, safety and regulatory issues, test design and data interpretation concepts, and specialized applications and new developments.
Registration begins at 7:30 AM and the class begins at 8:00 AM. Course sessions are from 8:00 AM to Noon.
Participants should bring their own laptop computer with the Windows XP or later operating system.
1. Introduction (45 min)
b. Basic terminology and concepts
c. Tracer materials
d. Regulatory requirements
e. Health and Safety Considerations
f. Overview of applications
2. Tracer testing to support injected reagent in situ remediation (75 min)
a. Review of relevant remediation hydraulics
b. Tracer test design and interpretation concepts
c. Examples and practice problems
d. Use of deuterium for ISCO applications
e. “Double tracer” method
f. Use in continuous delivery/recirculation systems
3. Break (15 min)
4. Surface water and ground-water-surface water interactions (30 min)
a. Mixing zone studies
b. Stream velocity
c. Stream dilution/GSI
5. Other Applications (60 min)
a. Dissolved gas tracers
b. Capture zone analysis
c. Single-well techniques
d. Techniques for assessing LNAPL mobility and NAPL saturation
e. Use of surface resistivity and LIF for high definition mapping
6. Closing and Questions (15 min)
Participants will be provided with a print out of the course notes, they will not require laptops.
Dr. Craig Divine is a Principal Hydrogeologist and Technical Expert with ARCADIS (Highlands Ranch, Colorado) with more than 15 years of experience in hydrogeology and hydrogeochemistry. Dr. Divine has particular expertise is in the design and analysis of applied tracer tests and has chaired topical sessions at national conferences, given numerous presentations, and written peer-reviewed journal articles regarding tracer testing methods and applications. Dr. Divine has designed and reviewed hundreds of tracer studies to support site characterization and remediation system design and operation and has lead the development of numerous innovations in tracer technology and application.
Dr. Elizabeth Cohen is a Chemical Engineer with a PhD in Environmental Chemistry. She has consulting experience in geochemistry and hydrogeology in Australia and the United States. Currently, Dr. Reece is an Environmental Scientist with ARCADIS in Novi, Michigan. Dr. Reece’s experience with tracers covers use in pristine and natural systems as well as a tool for characterization of contaminated sites and remediation design. She has significant experience in the use of both applied (fluorescent dyes, salts, deuterated water, dissolved gas) and environmental (isotopes, geochemical data) tracers both at a field level and during the planning, implementation, and data interpretation phases.
The course will be held in the Berthoud Hall. The Berthoud Hall (1516 Illinois St. Golden CO 80401) is located on the corner of 16th and Illinois Streets, and #5 on the campus map below.
All Visitor parking areas will have a pay and display parking meter. When arriving on campus for the first time, look for a parking meter, find a space in that location, pay the meter and display the receipt on your dash. You will find brochures at each of our parking meters that can also help guide you around the campus.
ENROLLMENT & REGISTRATION
The fee for the short course is $295 by 4PM Mountain Daylight Time, May 23, 2013 ($345 after May 23). You will be invoiced for the tuition balance. The fee covers instruction, course notes, refreshments, and continuing education units. Lodging and meals are not covered. Payment in full must be received prior to the beginning of the course. The registration fee may be paid by check, VISA, MasterCard, AMEX, Discover or purchase order (US Only). A maximum of 20 applicants will be able to attend the course due to space limitations.
If cancellation is made before
May 23, 2013, tuition will be refunded except for the $100 deposit. In case of cancellation, the right to course material is forfeited.
Substitutions are permitted at any time prior to the start of the course. Please
be advised that if the program is cancelled due to insufficient enrollment,
Colorado School of Mines will return all course fees, but will not be liable
for any other expenses incurred by the prospective attendees.
To register click here.
TRANSPORTATION AND LODGING
The Colorado School of Mines is located in Golden, which is 20 minutes west of Denver, 1 hour west of the Denver International Airport and can be reached by taxi, airport shuttle or rental car. It is strongly recommended that for events held on the CSM campus, attendees select accommodations within .5 miles of the campus if a rental car or personal transportation will not be available, as taxi service and public transportation from other areas may involve significant delays and costs. Lodging is available in Golden, within walking distance of the campus.
Denver Shuttle Service from Denver Airport
To get to SuperShuttle when you land, take the train from the Concourse to the Terminal. Pick up your luggage and proceed to the SuperShuttle counter located on Level 5/Baggage Claim, adjacent to the water feature in the center of the terminal. Counter staff will issue tickets and give directions to the van loading areas. For information, call 1-800-BLUEVAN. Their ticket counters are closed between 12am and 6am. If you arrive between these hours, please use the courtesy phone located at the ticket counter to notify dispatch of your arrival. Please contact a shuttle provider directly for more information on fees and destinations served. Shuttles pick-up and drop-off from Jeppesen Terminal Level 5, Island 3, outside doors 505-507 (east side) and 510-512 (west side).
Super Shuttle International Denver
Phone: (800) 525-3177
Web site: www.supershuttle.com
All Rental car companies at DIA are
located on airport property but are away from the main terminal. Each rental
company provides a courtesy shuttle to and from Jeppesen Terminal from their
locations. All courtesy shuttles pick-up and drop-off from Jeppesen Terminal
Level 5, Island 4, outside doors 505-513 (east side) and 504-512 (west side).
If you are arriving in Denver, please follow the overhead signage for the
appropriate pick-up location, or check-in at your company's counter in the
center of the Terminal.
For more information, please visit at http://www.flydenver.com/rentalcars
Taxis are readily available and service within the eight counties that make up the Denver metro area. Some companies may also provide service to other destinations within the state of Colorado. Check with your cab company of choice (or directly with your driver at the airport) for more information on fares and destinations served. Fares to Golden area are based on the taxi’s meter and it costs about $70-85 plus the $3.75 airport access fee. Taxis pick-up and drop-off from Jeppesen Terminal Level 5, Island 1, outside doors 507-511 (east side) and 506-510 (west side).